ADS Technologies Wireless Cable Modem Gateway SBG1000 - Manual (Page 15)

9 SBG1000 User Guide
Home
X
Exit Print
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Rear Panel
The rear panel provides cabling connectors, status lights, and the power receptacle:
Key Item Description
1 The printer port provides a connection for one printer.
2 The SBG1000 includes two antennas. The optional Motorola External Diversity Antenna described in
“ Optional Accessories ” provides higher gain to increase wireless LAN performance and coverage.
3 Use the HPNA ports to connect an HPNA LAN:
• Connect the bottom HPNA port to the telephone jack using telephone wire terminated with RJ-11
connectors.
• You can connect a telephone to the top HPNA port.
4 Use Ethernet ports 1 to 5 to connect an Ethernet LAN cable with RJ-45 connectors. You can connect
Ethernet-equipped computers, hubs , bridges , or switches.
5 For Windows only, use the USB port for Connecting a PC to the USB Port . You cannot connect the
SBG1000 USB port to a Macintosh or UNIX computer.
6 • If you experience a problem, you can push this recessed button to restart the SBG1000 (see
“
Troubleshooting ”). To reset all values to their defaults, hold down the button for more than five
seconds . Resetting may take 5 to 30 minutes because the SBG1000 must find and lock on the
appropriate communications channels.
7 The cable port provides a connection to the coaxial cable outlet.
8 The power connector to the AC power outlet.
1 3 4 6 8 5 7 2 2
5 1
…