ADS Technologies Wireless Cable Modem Gateway SBG1000 - Manual (Page 21)

15 SBG1000 User Guide
Home
X
Exit Print
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
HPNA LAN
To eliminate the need to install network wiring, the SBG1000 provides a Home Phoneline Network Alliance ( HPNA
or HomePNA) V2.0 connection. HPNA networks use existing telephone lines to connect the computers without
interfering with telephone voice service,
DSL , ISDN , modems, or fax machines. HPNA networks can extend up to
1000 feet (300 meters).
Sample HPNA network connections
Each computer requires an HPNA adapter to connect to the HPNA network. HPNA adapters (sold elsewhere) are
available for PCI or USB. After installing the HPNA adapter, you must install HPNA driver software on the
computer following the instructions provided with the HPNA adapter.
HPNA 2.0 supports 10 Mbps data transfer similar to Ethernet 10Base-T.
If there is more than one telephone line, you must make all HPNA connections to the same line. You can connect
a telephone to the top HPNA port on the
Rear Panel .
Existing wiring
Phone
system