ADS Technologies Wireless Cable Modem Gateway SBG1000 - Manual (Page 58)

52 SBG1000 User Guide
Home
X
Exit Print
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Gateway > PORT FORWARDING — config Page
Use this page to configure up to 32 virtual servers:
Gateway > PORT FORWARDING — config page fields
Field Description
ADD NEW PORT
FORWARDING ENTRY You can configure up to 32 virtual servers.
Template If you select Custom, you must set the Name, Port Start, Port End, and LAN IP Address.
If you select a predefined template such as HTTP or FTP, the Name, Port Start, Port End
values are provided. You only need to enter LAN IP Address and change default values only
if necessary.
Name Type a unique identifier for the custom virtual server. The typical practice is to use the
protocol as a unique identifier (for example “ftp”).
Port Start Sets the LAN internal interface port or the start of a port range. Inbound Internet connection
requests are statically mapped to this port.
Port End If a range of ports is required, sets the end of the port range.
LAN IP Address Sets the private LAN IP address for the port forwarding page. An Internet user must know the
public IP address to access any port forwarding entry you define on the private LAN.
Enable Check this box to enable the port forwarding entries to be accessed through NAT.
Add Click to add the virtual server to the PORT FORWARDING list.
PORT FORWARDING Displays the configured custom virtual servers.