Installing the optional external diversity antenna, Installing the optional external, Diversity antenna – ADS Technologies Wireless Cable Modem Gateway SBG1000 User Manual

Page 35

Advertising
background image

29

SBG1000 User Guide

Home

X

Exit

Print

Overview Installation Troubleshooting Contact

FAQ Specifications Glossary License

Configuration: Basic Gateway TCP/IP Wireless Print Server USB

Installing the Optional External Diversity Antenna

The optional Motorola External Diversity Antenna ANT11b provides an indoor operating range with

WEP

enabled

of at least:

The maximum wireless operation distance depends on the type of materials through which the signal must pass
and the location of the

diversity antennas

and

clients

(stations). Motorola cannot guarantee wireless operation for

all supported distances in all environments.

To install the optional Motorola External Diversity Antenna:

1

Be sure the SBG1000 is unplugged.

As with all electronic equipment, avoid potential shock by always unplugging the power cord from the wall
outlet or other power source before disconnecting it from the SBG1000 rear panel or external power supply.

2

Remove the antennas on the SBG1000 by unscrewing the connectors. You may need a pair of needle nose
pliers to loosen them:

Distance

Data Transfer Rate

100 feet (30 meters)

11 Mbps

165 feet (50 meters)

5.5 Mbps

230 feet (75 meters)

2 Mbps

300 feet (95 meters)

1 Mbps

Advertising