AMX Modero NXD-1000Vi - Manual (Page 130)

Firmware Pages and Descriptions
120 10" Modero Widescreen Touch Panels
Setting the image cache
In the Protected Setup page:
1. Press the Cache button in the Protected Setup Navigation Buttons section. This opens the Image
Cache page.
2. Set the cache expiration in the field Flash/RAM Cache Expires. The Up and Down arrows increment
through the available time frames.
3. Press the Enable button to turn on image caching. The button appears illuminated when enabled.
You can allocate Flash memory for image caching, but RAM cache is always enabled.
Select the Up and Down arrows for the field Flash Cache Size to increase or reduce the amount of Flash
memory used; the maximum amount of flash that can be allocated for caching is 75% of available flash.
Clearing the image cache
In the Protected Setup page:
1. Press the Cache button in the Protected Setup Navigation Buttons section. This opens the Image
Cache page.
2. Press Clear Cache. This clears all image cache currently stored on the panel (both Flash and
RAM).
Checking image cache status
In the Protected Setup page:
Press the Cache button in the Protected Setup Navigation Buttons section. This opens the Image Cache
page. All status information is located in the Image Cache Status section of the page.
Password Setup Page
The Password Setup page (FIG. 91) centers around the properties used to assign passwords for the
Modero panel pages.
FIG. 91 Password Setup page