AMX Modero NXD-1000Vi - Manual (Page 131)

Firmware Pages and Descriptions
121 10" Modero Widescreen Touch Panels
The elements of the Password Setup page are described in the table below:
SIP Settings Page
The options on the SIP Settings page (FIG. 92) enable you to establish network settings for using your
touch panel as an IP phone. With a CSG SIP Communications Gateway (FG2182-01, -02, -03), you can
use your touch panel to make and receive local, long distance, and international phone calls, and have
access to phone features like call waiting, caller ID, call forwarding, call queuing, and voice mail.
Setting up your touch panel as a telephone requires that you set it up as one in the CSG SIP
Communications Gateway. Refer to the CSG SIP Communications Gateway Operation/Reference Guide
for information on setting up your touch panel to work as a telephone.
FIG. 92 SIP Settings page
You may need to load a Duet module to enable the touch panel to receive SIP calls. The Duet module
translates between the standard interface and the device protocol. It parses the buffer for responses from
the device, sends strings to control the device, and receives commands from the UI module or telnet
sessions. Refer to the documentation supplied with the Duet Module for more details.
Password Setup Page Elements
Back: Saves the changes and returns you to the previously active touch panel page.
Connection Status icon: This visual display of the connection status allows the user to have a current
visual update of the panel’s connection status regardless of what page is
currently active.
• A Lock only appears on the icon if the panel has established a connection
with a currently secured target Master (requiring a username and password).
In Panel Password
Change: Accesses the alphanumeric values associated to particular password sets.
• PASSWORD 1, 2, 3, 4, 5 (protected) buttons open a keyboard where you can
enter alphanumeric values associated to a selected password group.
• Clearing Password #5 removes the need to enter a password before
accessing the Protected Setup page.
A sample UI module is provided in the module package. It is not intended to cover
every possible application, but can be expanded as needed by a dealer to meet the
requirements of a particular installation.