AMX Modero NXD-1000Vi - Manual (Page 99)

Firmware Pages and Descriptions
89 10" Modero Widescreen Touch Panels
System Settings Page
The System Settings page (FIG. 74) sets the Secondary DNS Address information with its corresponding
IP communication parameters, NetLinx Master communication settings, and reads the device number
assigned to the Modero panel.
The elements of the System Settings page are described in the table below:
FIG. 73 Button/slider Function Show example
FIG. 74 System Settings page showing default values (reads and assigns values to the panel and Master)
System Settings Page Elements
Back: Saves the changes and returns you to the previously active touch panel page.
Connection Status icon: This visual display of the connection status allows the user to have a current
visual update of the panel’s connection status regardless of what page is
currently active.
• A Lock only appears on the icon if the panel has established a connection
with a currently secured target Master (requiring a username and password).
Channel Code
3,132
2,8 3,50
Channel Port
Level Port Address Port
Address Code
Channel Code
BUTTON
IP Settings section
Master Connection section
(NetLinx Master properties)
Master Connection features do not take
effect until the panel is rebooted
Red fields are user-editable
Blue fields cycle through choices
Grey fields are read-only