AMX Modero NXD-1000Vi - Manual (Page 144)

Full Duplex Intercom
134 10" Modero Widescreen Touch Panels
5. Press Back to return to the intercom setup pages.
6. Press Exit when you are finished.
Allowing a panel to monitor
1. Select the Setup button on your intercom page.
2. On the intercom setup page, press Advanced Setup. This launches the password numeric keypad.
3. Enter the password and press Done. The default password is Password 4 of the panel’s firmware
Password Setup.
4. Press the button beneath Allow This Panel to Monitor to toggle the option. The button indicates its
current state. If you attempt to monitor a panel that has not given permission to be monitored, your
panel provides the popup in FIG. 102.
5. Press Back to return to the intercom setup pages.
6. Press Exit when you are finished.
Naming a panel
1. Select the Setup button on your intercom page.
2. On the intercom setup page, press Advanced Setup. This launches the password numeric keypad.
3. Enter the password and press Done. The default password is Password 4 of the panel’s firmware
Password Setup.
4. Press in the area under Panel Name. This launches a on screen keyboard.
5. Type the name of the panel and press Done. This is the name that is displayed in other panels’
intercom call directory pages.
6. Press Back to return to the intercom setup pages.
7. Press Exit when you are finished.
FIG. 102 Privacy Enabled