AMX Modero NXD-1000Vi - Manual (Page 143)

Full Duplex Intercom
133 10" Modero Widescreen Touch Panels
Advanced Setup
The intercom’s advanced setup pages are accessed through the intercom setup pages. The advanced
pages allow you to set the panel intercom to be monitored, to monitor other intercom panels, and to name
the panel. It is important to name the intercom panel; the name is displayed in other panels’ intercom call
directory pages.
Allowing a panel to be monitored
1. Select the Setup button on your intercom page.
2. On the intercom setup page, press Advanced Setup. This launches the password numeric keypad.
3. Enter the password and press Done. The default password is Password 4 of the panel’s firmware
Password Setup.
4. Press the button beneath Allow This Panel to be Monitored to toggle the option. The button indicates
its current state. (FIG. 101)
FIG. 100 Intercom Advanced Setup Page
FIG. 101 Room Monitored