Sony VPL-VW100 User Manual
Page 23
23
GB
Step 3: Adjusting the Picture Size and Position
C
o
n
nec
tio
n
s an
d Pr
epa
ra
tio
n
s
1
Plug the AC power cord into a wall outlet.
The ON/STANDBY indicator lights in red and the projector goes into
standby mode.
2
Press the
?
/
1
(on/standby)
switch to turn on the projector.
The ON/STANDBY indicator flashes in green, and then lights in green.
3
Turn on the equipment connected to the projector.
Refer to the operating instructions of the connected equipment.
4
Press INPUT to project the picture on the screen.
Each time you press the button, the input indication and equipment to be
projected change. (
Tip
When “Auto Input Search” is set to “On” in the Function
menu, the channel
of the signal input is automatically displayed by pressing INPUT. (
5
Adjust the vertical picture position.
Press the LENS button repeatedly until the Lens Shift adjustment window
(test pattern) appears. Then select the proper vertical position by pressing
the
M/m/</, buttons.
To move the position upward, press
M
or
,
.
To move the position downward, press
m
or
<
.
ON/
STANDBY
Lights in red.
ON/
STANDBY
Flashes in green for a few
seconds, and then lights in
green.
INPUT
Video