Sony VPL-VW100 - Manual (Page 39)

39 GB
Adjusting the Picture Using Real Color Processing
Pr
oj
ec
ting
Adjusting the Picture Using Real Color
Processing
The Real Color Processing (RCP) feature allows you to adjust the color and
hue of each target of the projected picture you specify independently. You can
thus obtain a picture more suitable to your taste.
Tip
Freeze the scene of the video source when you are adjusting the picture using Real Color
Processing.
1
Press RCP on the remote control.
2
Press M or m to select “User 1,” “User 2” or “User 3,” then
press , .
The RCP (Real Color Processing) window appears.
3
Select the target color you want to adjust.
Repeat steps 1 and 2 described below to specify the target color.
1 Press M or m to select “Color Select,” then press < or , to select the
color you want to adjust among “Red,” “Yellow,” “Green,” “Cyan,”
“Blue” and “Magenta.”
Only the portions that correspond to the specified color will be colored
and the other portions will be displayed in black and white. The
reference palette in the RCP window also shows the adjustable colors.
Decide the target while you are watching the projected picture, and
watching the reference palette as a guide.
INPUT LIGHT
STANDARD CINEMA DYNAMIC
USER 2
PICTURE MODE
REAL COLOR PROCESSING
USER 3 USER 1
ADJ PIC MENU LENS
RCP
BRIGHT CONTRAST
RESET WIDE MODE
ENTER
2, 3, 4
1