Sony VPL-VW100 - Manual (Page 55)

55 GB
Information Menu
U
s
in
g t
he M
e
n
u
s
Information Menu
The Information menu displays the model name, serial number, the horizontal
and vertical frequencies of the input signal and the cumulated hours of usage
of the lamp.
You cannot change the displays listed above.
This projector has 42 types of preset data for input signals (the preset memory).
When the preset signal is input, the projector automatically detects the signal
type and recalls the data for the signal from the preset memory to adjust it to
an optimum picture. The memory number and signal type of that signal are
displayed in the Information
menu.
You can also adjust the preset data through the Signal menu.
This projector also has 20 types of user memories for Input-A and DVI
channels mainly for the computer signal into which you can save the setting of
the adjusted data for an unpreset input signal, respectively.
When an unpreset signal is input for the first time, a memory number is
displayed as 0. When you adjust the data of the signal in the Signal
menu,
it will be registered to the projector. If more than 20 user memories are
registered, the newest memory always overwrites the oldest one.
See the chart on page 71 to find if the signal is registered to the preset memory.
When the aspect ratio of input signal does not match the screen size, a part of the screen
is displayed in black.
Model name Displays the model name (VPL-VW100) and the serial number.
fH Displays the horizontal frequency of the input signal.
fV Displays the vertical frequency of the input signal.
Memory No. Displays the preset memory number of the input signal.
Signal type Displays the type of the input signal.
Lamp Timer Indicates how long the lamp has been turned on (total usage).
Note
About the Preset Memory No.
Note
Memory No.
Signal type
Serial No.
Model name