Sony VPL-VW100 - Manual (Page 43)

43 GB
Operation through the Menus
U
s
in
g t
he M
e
n
u
s
4
Make the setting or adjustment of an item.
When changing the adjustment level
To increase the value, press M or ,.
To decrease the value, press m or <.
Press ENTER to restore the original screen.
When changing the setting
Press M or m to change the setting.
Press ENTER to restore the original screen.
You can restore the original screen using
< depending on the selected
item.
To clear the menu
Press MENU.
To reset the items that have been adjusted
Select the item you want to reset, then press RESET.
“Complete! ” appears on the screen and the setting is reset to its factory preset
value.
Items that can be reset are:
• “Contrast,” “Brightness,” “Color,” “Hue,” “Sharpness” and “Color Temp.”
in “Adjust Picture,” and “RCP” on the Picture menu
• “Dot Phase,” “H Size,” and “Shift” of “Adjust Signal,” “V Position,”
“Title Area,” and “DRC Palette” of “DRC Mode” on the Signal menu
• “V Keystone” on the Installation menu
Items that cannot be adjusted
Adjustable items are limited depending on the input signals. The items that
cannot be adjusted or set do not appear in the menu. (
1 page 74)
Adjust Picture Cinema
Contrast : 80
Brightness : 50
Color : 50
Hue : 50
Sharpness : 50
Black Level Adj. : Off
Gamma Correction : Off
Color Temp : Low
NR : Off
Auto Advanced Iris :
Picture
Signal
Function
Setup
Installation
Information
Sel: Set: Back: Exit:
Next menu window
Setting items