ARM IM-AD1 - Manual (Page 86)

Mechanical Specification
B-2 Copyright © 2001-2003. All rights reserved. ARM DUI 0163B
B.1 Mechanical information
Figure B-1 shows the dimensions for the connectors on the top side of the board. See
Table B-1 on page B-4 for details on connector type, part numbers, and manufacturers.
Figure B-1 Board dimensions (top view)
The Integrator/IM-AD1 is designed to be stackable (as the top card). Figure B-2 on
page B-3 shows the dimensions for the connectors on the bottom side of the board as
viewed from the top side of the board. These connectors carry the signals between the
IM-AD1 and the logic module. (All dimensions are in mm.)
5.59
10.16
10.03
10.34
5.72 7.77
19.56
79.63
101.73
123.83
146.05
171.96
72.64
18.16
16.76
63.50
22.35
48.26
22.35
17.55
29.72
29.97
66.04
83.82
23.75
33.95
23.75
23.75
109.98
28.58
22.35
17.65