Alliance Laundry Systems UW POCKET HARDMOUNT UW35B2 - Manual (Page 14)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
F232085 12
Delivery Inspection
Upon delivery, visually inspect crate, protective cover,
and unit for any visible shipping damage. If the crate,
protective cover, or unit are damaged or signs of
possible damage are evident, have the carrier note the
condition on the shipping papers before the shipping
receipt is signed, or advise the carrier of the condition
as soon as it is discovered.
Remove the crate and protective cover as soon after
delivery as possible. If any damage is discovered upon
removal of the crate and/or protective cover, advise the
carrier and file a written claim immediately.
Customer Service
If literature or replacement parts are required, contact
the source from which the machine was purchased or
contact Alliance Laundry Systems LLC at
(920) 748-3950 for the name of the nearest authorized
parts distributor.
For technical assistance, call:
(920) 748-3121
Ripon, Wisconsin
Serial Plate Location
A record of each machine is on file with the
manufacturer. The serial number decal is located at the
rear of the machine. Figure 1 shows the location of the
serial number on the decal. Always provide the
machine’s serial number and model number when
ordering parts or when seeking technical assistance.
For the UWP2 models, the serial number decal is
located on the left side of the control module toward
the rear.