Alliance Laundry Systems UW POCKET HARDMOUNT UW35B2 - Manual (Page 33)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
31 F232085
Chemical Injection Supply System Undiluted chemical dripping can damage the washer-
extractor. Therefore, all chemical supply dispenser
pumps should be mounted below the washer’s
injection point. All dispenser tubing should also run
below the injection point. Loops do not prevent drips if
these instructions are not followed. Failure to follow
these instructions could damage the machine and void
the warranty. Figure 14 shows a typical chemical
injection supply system.
Figure 14
Wear eye and hand protection when
handling chemicals; always avoid direct
contact with raw chemicals. Read the
manufacturer’s directions for accidental
contact before handling chemicals. Ensure
an eye-rinse facility and an emergency
shower are within easy reach. Check at
regular intervals for chemical leaks.
SW016
WARNING
P040I
1 Injection Point
2 Chemical Dispenser Pump Outlet
3 PVC Pipe
1
2
3