Sony DSC-P2 - Manual (Page 10)

10
filename[C:\My Documents\_upload job\3075509121\3075509121DSCP2UC\02GB-DSCP2UC\04BAS.FM]
masterpage:Left
model name1[DSC-P2]
[3-075-509-12(1)]
Charging the battery pack
, Open the battery/“Memory
Stick” cover.
Slide the cover in the direction of the arrow.
• When charging the battery pack, make
sure the camera is not turned on
(page 14).
• The camera operates only with the
“InfoLITHIUM” battery NP-FC10 battery pack
(C type) (supplied). You cannot use any other
battery pack (page 95).
, Insert the battery pack, and
close the cover.
Insert the battery pack with the v mark
facing toward the battery compartment as
illustrated above. Make sure the battery
pack is properly inserted, then close the
cover.
• While pushing the battery eject lever down
using the front edge of the battery pack, you
can easily insert the battery pack.
, Open the jack cover, and
connect the AC-LS1A AC
power adaptor (supplied) to the
DC IN jack of the camera.
Open the cover in the arrow direction as
illustrated above. Connect the plug with the
v mark facing up.
• Do not short the DC plug on the AC power
adaptor with a piece of metal. This may cause a
malfunction.
• Clean the DC plug of the AC power adaptor
with a dry cotton bud. Do not use the dirty plug.
Use of the dirty plug may not properly charge
the battery pack.
1
OPEN
2
Battery eject lever
3
Jack cover
AC power adaptor
DC plug
Getting started
04BAS.FM Page 10 Wednesday, May 15, 2002 10:56 AM