Viewing images on a tv screen – Sony DSC-P2 User Manual
Page 32
32
filename[C:\My Documents\_upload job\3075509111\3075509111DSCP2UC\02GB-DSCP2UC\06BAS.FM]
model name1[DSC-P2]
[3-075-509-11(1)]
masterpage:L1-Left-01
Viewing images on a TV screen
,
Using the A/V connecting
cable, connect the A/V OUT
(MONO) jack of the camera to
the audio/video input jacks of
the TV set.
If your TV has stereo type input jacks,
connect the audio plug (black) of the A/V
connecting cable to the Lch jack.
•
Connect the A/V connecting cable to the
camera and the TV set only after confirming
that both are turned off.
1
A/V OUT (MONO) jack
A/V connecting cable
(supplied)
,
Turn on the power of the TV
set, and set the TV/Video
toggle switch of the TV to
“Video.”
•
Depending on your TV set, the name and
location of this switch may be different.
2
TV/Video toggle switch
,
Set the mode dial to
, and
turn on the camera.
Press b/B on the control button to select an
image.
•
When using this feature, it may be necessary to
switch the video output signal to match that of
your TV system (page 93).
FILE BACK/NEXT
10:30
PM
2002 7 4
100-0028
8
/
8
3
VOLUME
1600
60min
01cov.book Page 32 Wednesday, April 3, 2002 11:17 AM