Sony DSC-P2 User Manual
Page 11
filename[C:\My Documents\_upload job\3075509111\3075509111DSCP2UC\02GB-DSCP2UC\04BAS.FM]
masterpage:L1-Right
model name1[DSC-P2]
[3-075-509-11(1)]
11
G
e
tt
in
g star
te
d
,
Connect the power cord (mains
lead) to the AC power adaptor
and to a wall outlet (wall
socket).
Charging starts, and the /CHG lamp lights.
When the /CHG lamp goes out, charging is
finished (full charge).
•
When charging is finished, disconnect the AC
power adaptor both from the camera and the
wall outlet (wall socket).
To remove the battery pack
Open the battery/“Memory Stick” cover,
and push down the battery eject lever in the
arrow direction as illustrated above.
•
Make sure you do not drop the battery pack
when you remove it.
4
Power cord
(mains lead)
AC power adaptor
2
To a wall outlet
(wall socket)
1
/CHG
/CHG lamp
Battery eject lever
Battery remaining indicator
The battery remaining indicator shows
the remaining shooting or viewing
time.
•
It takes about 1 minute that the proper
remaining time is calculated.
•
A proper remaining time may not be
indicated depending on conditions of use
or circumstances.
60min
1600
4
FINE
01cov.book Page 11 Wednesday, April 3, 2002 11:17 AM