Sony DSC-P2 - Manual (Page 14)

14
filename[C:\My Documents\_upload job\3075509121\3075509121DSCP2UC\02GB-DSCP2UC\04BAS.FM]
model name1[DSC-P2]
[3-075-509-12(1)]
masterpage:L1-Left-01
Turning on/off your camera
, Press POWER.
The POWER lamp lights in green, the
power is on. When you turn on your camera
for the first time, the CLOCK SET screen
appears (see the next page).
To turn off the power
Press POWER again, the POWER lamp
goes out, and the camera turns off.
• If you turn the power on when the mode dial is
set to SCN,
, or the lens comes out.
Please be careful not to touch the lens.
POWER
ON/OFF(CHG)
POWER
POWER lamp
The Auto Power Off
function
If no tasks are performed for a while*
when shooting, viewing images, or
setting up the camera while using the
battery, power is automatically shut off
to preserve battery power.
However, in the following
circumstances, even if the battery is
being used to power the camera, the
Auto Power Off function will not work.
• Movies are being played back
• A slide show is being shown
• A cable is connected to the USB jack
or the A/V OUT (MONO) jack
* When [POWER SAVE] is set to [ON]:
approximately 90 seconds
When [POWER SAVE] is set to [OFF]:
approximately three minutes
How to use the
control button
To change the current settings of the
camera, bring up the menu or the SET UP
screen (page 50), and use the control button
to make the changes.
For each item, press v/V/b/B to select the
desired value, then press the center z or
b/B to make the setting.
WHITE BAL
AUTO
ISO
WB EV ISO
0EV
0EV
04BAS.FM Page 14 Wednesday, May 15, 2002 10:56 AM