Sony DSC-P2 User Manual
Page 58
58
filename[C:\My Documents\_upload job\3075509111\3075509111DSCP2UC\02GB-DSCP2UC\10ADV.FM]
masterpage:Left
model name1[DSC-P2]
[3-075-509-11(1)]
Before operation
Set [MOVING IMAGE] to [MULTI
BURST] in the SET UP settings (pages 50,
92).
a
Set the mode dial to
.
b
Press MENU.
The menu appears.
c
Select
(INTERVAL) using
b
/
B
, then select the desired
between-frame interval using
v
/
V
.
You can choose the between-frame
interval from among the following.
NTSC: 1/7.5 sec., 1/15 sec., 1/30 sec.
PAL: 1/6.3 sec., 1/12.5 sec., 1/25 sec.
(For information on NTSC/PAL, see
page 91.)
d
Press the shutter button.
16 frames will be recorded as one
image (image size: 1280×960).
To delete shot images
When using this mode, you cannot delete
only certain frames. When you delete
images, all 16 of the frames are deleted at
the same time.
1
Set the mode dial to
.
2
Press MENU and select [DELETE], then
press the center z.
3
Select [OK], then press the center z.
All of the frames are deleted.
•
When you play back images recorded in Multi
Burst mode, the 16 frames will be played back
in order, with a fixed interval between them.
•
When the images are played back on a
computer, the 16 frames you shot will all be
displayed at the same time as part of one image.
•
When Multi Burst images are played back on a
camera without the Multi Burst feature, the 16
frames will all be displayed at the same time, as
part of one image, just as they are on a
computer.
•
For the number of images that can be recorded,
see page 87.
•
The flash cannot be used.
•
The date and time cannot be inserted.
Shutter button
Mode dial
Control button
MENU
INTERVAL
1/30
1/15
1/7.5
1/30
WB
01cov.book Page 58 Wednesday, April 3, 2002 11:17 AM