Sony DSC-P2 - Manual (Page 65)

filename[C:\My Documents\_upload job\3075509111\3075509111DSCP2UC\02GB-DSCP2UC\11ADV02.FM]
masterpage:Right
model name1[DSC-P2]
[3-075-509-11(1)]
65
S
till im
a
g
e
e
d
iti
n
g
f To protect other images,
repeat Step
5 .
g Press MENU.
The menu appears.
h Select [OK] using the B , then
press the center z .
The selected image is protected.
To cancel the protection
Select [CANCEL] in Step 4 or select
[EXIT] in Step 8.
To release protection
In Step 5, using v/V/b/B, select an
image for which you want to release
protection, and press the center z. Repeat
this operation for all the images for which
you want to release protection. Then, press
MENU, select [OK], and press the center
z.
To protect all your images
In Step 4, select [ALL], then press the
center z. Next, select [ON], then press the
center z.
To release all protection
In Step 4, select [ALL], and press the
center z. Then select [OFF], and press the
center z.
For the Index (three images)
screen
a Set the mode dial to , press
the zoom W button twice to
switch to the Index (three
images) screen.
b Move the image you want to
protect to the center using
b /
B .
c Press MENU.
The menu appears
d Select [PROTECT] using v / V ,
then press the center z .
The center image is protected, and a
-
(Protect) mark is placed on that
image.
e To protect other images, move
the image you want to protect
to the center using
b / B , and
repeat Step 4 .
To release protection
In Step 4, select the image from which
you want to release protection, and press the
center z. To release protection from all of
your images, repeat this process for each of
them.
PROTECT
PRINT
DELETE
• OK
10:30 PM 2002 7 4 100-0005
01cov.book Page 65 Wednesday, April 3, 2002 11:17 AM