Sony DSC-P2 - Manual (Page 97)

filename[C:\My Documents\_upload job\3075509111\3075509111DSCP2UC\02GB-DSCP2UC\14ADD.FM]
masterpage:Right
model name1[DSC-P2]
[3-075-509-11(1)]
97
A
ddi
tion
al
i
n
fo
rm
at
io
n
Output connectors
A/V OUT (MONO) jack
Minijack
Video: 1 Vp-p, 75
Ω , unbalanced,
sync negative
Audio: 327 mV (at a 47 k
Ω load)
Output impedance 2.2 k Ω
USB jack mini-B
LCD screen
LCD panel used
3.8 cm (1.5 type) TFT drive
Total number of dots
123 200 (560×220) dots
Power, general
Used battery pack
NP-FC10
Power requirements
3.6 V
Power consumption (when shooting)
1.7W
Operating temperature range
0° to + 40°C (32° to + 104°F)
Storage temperature range
− 20° to + 60°C ( − 4° to + 140°F)
Dimensions 114 Ч 51.5 Ч 35.6 mm
(4 1 / 2 Ч 2 Ч 1 13 / 32 inches)
(W/H/D, protruding portions not
included)
Mass 206 g (7 oz) (NP-FC10 battery pack,
“Memory Stick” and wrist strap
included)
Microphone Electret condenser microphone
Speaker Dynamic speaker
AC-LS1A AC power adaptor
Power requirements
AC 100 – 240 V, 50/60 Hz
Rated output voltage
DC 4.2 V, 1.5 A
Operating temperature range
0° to + 40°C (32° to + 104°F)
Storage temperature range
− 20° to + 60°C ( − 4° to + 140°F)
Dimensions 105 Ч 36 Ч 56 mm (4 1 / 4 Ч 1 7 / 16 Ч
2 1 / 4 inches) (W/H/D, protruding
parts not included)
Mass Approx. 180 g (6 oz)
(adaptor only)
NP-FC10 battery pack
Used battery Lithium ion battery
Maximum voltage
DC 4.2 V
Nominal voltage
DC 3.6 V
Capacity 2.4 Wh (675 mAh)
Accessories
• A/V connecting cable (1)
• NP-FC10 battery pack (1)
• AC-LS1A AC power adaptor (1)
• Power cord (mains lead) (1)
• USB cable (1)
• Wrist strap (1)
• “Memory Stick” (16MB) (1)
• CD-ROM (USB driver: SPVD-008) (1)
• Operating Instructions (1)
Design and specifications are subject to change
without notice.
01cov.book Page 97 Wednesday, April 3, 2002 11:17 AM