Sony VPL-VW12HT - Manual (Page 16)

16
(GB)
Installing the Projector / Connecting the Projector
Installing the Projector
This section describes the installation arrangements
for installing the projector.
The distance between the lens and the screen varies
depending on the size of the screen.
Use the following table as a guide.
(For details, see “Installation Example” on page 32 (GB).)
Unit: m (feet)
16:9
screen
size
40 60 80 100 120 150 200 300
(inches)
Minimum 1.3 1.9 2.6 3.3 3.9 4.9 6.6 9.9
Distance (4.1) (6.3) (8.5) (10.7) (12.9) (16.2) (21.7) (32.6)
Maximum 1.5 2.2 3.0 3.8 4.6 5.7 7.6 11.5
Distance (4.8) (7.4) (9.8) (12.4) (14.9) (18.7) (25.0) (37.7)
Distance between the screen
and the center of the lens
4:3
screen
size
40 60 80 100 120 150 200 300
(inches)
Minimum 1.6 2.4 3.2 4.0 4.8 6.1 8.1 12.2
Distance (5.1) (7.8) (10.5) (13.2) (15.9) (19.9) (26.6) (40.0)
Maximum 1.8 2.8 3.7 4.7 5.6 7.0 9.4 14.1
Distance (6.0) (9.1) (12.3) (15.4) (18.3) (23.0) (30.8) (46.2)
Connecting the Projector
When making connections, be sure to do the
following:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs properly; plugs that are not
fully inserted often generate noise. When pulling out
a cable, be sure to pull it out grasping the plug, not
the cable itself.
Connecting to a VCR/15k RGB/
Component/Progressive
Component Equipment
This section describes how to connect the projector to
a VCR, external active speakers, and 15k RGB/
component/progressive component equipment.
For more information, refer to the instruction manuals
of the equipment you are connecting.
Left side
CONTROL S IN VIDEO IN
TRIGGER
REMOTE
INPUT A
INPUT B
PLUG IN POWER
RS-232C
(FOR SERVICE USE)
S VIDEO
G/Y B/C B /P B R/C R/ P R SYNC/HD VD
VIDEO
G/Y B/C B /P B R/C R/ P R SYNC/HD VD
S-Video cable
(not supplied)
Video cable
(not supplied)
Active speakers
to video
output to S video
output
VCR