Adjustments and settings using the menu, Using the menu, Adjustments and settings using the men u – Sony VPL-VW12HT User Manual

Page 23: About the retention of the settings, When no signal is input

Advertising
background image

23

(GB)

Using the Menu

The projector is equipped with an on-screen menu for
making various adjustments and settings.
You can select the language to be used in the menu.

For details on selecting the language used in the menu, see
page 18 (GB).

1

Press the MENU key.
The menu display appears.
The menu presently selected is shown as a yellow
button.

PICTURE CTRL

CONTRAST:

80

BRIGHT:

50

RGB ENHANCER: 30

COLOR TEMP: LOW

INPUT-A

2

Use the

M or m key to select a menu, then press

the

, or ENTER key.

The selected menu appears.

SET SETTING

STATUS:

ON

INPUT-A:

COMPONENT

INPUT-B:

COMPONENT

LANGUAGE:

ENGLISH

POWER SAVING: OFF

SIRCS RECEIVER:

FRONT&REAR

INPUT-A

3

Select an item.
Use the

M or m key to select the item, then press

the

, or ENTER key.

4

Adjust an item.
• When changing the adjustment level:

To increase the value, press the

M or , key.

To decrease the value, press the

m or < key.

Press the ENTER key to restore the original
screen.

• When changing the setting:

Press the

M or m key to change the setting.

Press the

< or ENTER key to restore the

original screen.

For details on setting individual items, see the relevant
menu pages.

Menus Setting items

To clear the menu display

Press the MENU key.
The menu display disappears automatically if no key
is pressed for one minute.

To reset items that have been adjusted

Press the RESET key.
“Complete!” appears on the screen and the settings
appearing on the screen will be reset to their factory
preset values.
Items that can be reset are:
• “CONTRAST,” “BRIGHT,” “COLOR,” “HUE,”

“SHARP,” and “RGB ENHANCER” in the
PICTURE CTRL menu.

• “DOT PHASE,” “SIZE H,” “SHIFT,” “V SCROLL,”

and “TITLE AREA” in the INPUT SETTING menu.

• “DIGIT KEYSTONE” in the INSTALL SETTING

menu.

About the retention of the settings

The settings are automatically stored in the projector
memory.

When no signal is input

When there is no input signal, “NO INPUT–Cannot
adjust this item.” appears on the screen, and each item
cannot be adjusted.

Using the Menu

Adjustments and Settings Using the Men

u

Advertising