Projecting, Turn on equipment connected to the projector – Sony VPL-VW12HT User Manual
Page 19
19
(GB)
Selecting the Menu Language / Projecting
1
After all equipment is connected completely, plug
the AC power cord into the wall outlet.
The ON/STANDBY indicator lights in red and the
projector goes into the standby mode.
2
Press the
I
/
1 key on the control panel or
the
I
key on the Remote Commander.
The ON/STANDBY indicator lights in green.
3
Turn on equipment connected to the projector.
Projecting
LAMP/
COVER
TEMP/
FAN
POWER
SAVING
ON/
STANDBY
MENU
LIGHT
VIDEO MEMORY
ENTER
PATTERN
RESET
INPUT
MUTING
INPUT SELECT
VIDEO MEMORY
PIC
VIDEO
S VIDEO
A
1
2
3
4
OFF
MENU
ENTER
RESET
5
6
B
2
4
1
5,6
5
2
4
5
Select LANGUAGE with the
M or m key, then
press the
, or ENTER key.
6
Select the language desired with the
M or m key,
then press the
< or ENTER key.
The menu changes to the selected language.
To clear the menu display
Press the MENU key.
The menu display disappears automatically if no key
is pressed for one minute.
SET SETTING
INPUT-A
STATUS:
ON
INPUT-A:
COMPONENT
INPUT-B:
LANGUAGE:
POWER SAVING:
SIRCS RECEIVER:
CINE MOTION:
ENGLISH
FRANCAIS
DEUTSCH
ITALIANO
ESPANOL
(Continued)