Sony STR-DA5600ES - Manual (Page 118)

118 GB
x L
Sets the data of the left channel to the
reference value.
x R
Sets the data of the right channel to the
reference value.
Notes
• This function works only when you select “Front
Reference” for the auto calibration type
(page 115).
• Perform auto calibration after you set “Front Ref
Type.”
Speaker settings
You can adjust each speaker manually. You
can also adjust the speaker levels after auto
calibration is completed.
Note
The Speaker settings are only for the current
“Seating Position.”
You can set the speaker impedance. For
details, see “9: Setting the speakers”
(page 44).
x 4
Ω
x 8
Ω
Selects “Speaker Pattern” according to the
speaker system which you are using. Select the
speaker pattern before you perform auto
calibration.
You can set the analog downmix settings on or
off.
x OFF
If the speaker pattern is set so that there is a
center speaker, this setting is set to “OFF”
automatically.
x ON
We recommend you set “Center Mix” to “ON”
to enjoy digital audio with high quality sound
when you do not have a center speaker
connected. Analog downmix works when you
set “Center Mix” to “ON.” This setting is also
effective to input signals from the MULTI
CHANNEL INPUT jacks.
Impedance
Speaker Pattern
Center Mix