Sony STR-DA5600ES - Manual (Page 125)

125 GB
Adju
stin
g Setti
ngs
x OFF
Lets you turn off output of 12V triggers even
when the main receiver is turned on.
x CTRL
Lets you turn the output of 12V triggers on or
off manually using the control command of an
external control device.
x ZONE
Lets you turn the output of 12V triggers on or
off based on whether the selected zone is
turned on or off.
x INPUT (for “Main” only)
Lets you turn on the output of 12V triggers
when the preset input is selected.
When you select “Input,” the setting display
which sets each input trigger to on/off appears.
Press
V/v to select the input, then press to
check the box.
x HDMI A (for “Main” only)
Lets you turn the output of 12V triggers on or
off based on the output setting of the HDMI
OUT A jack.
x HDMI B (for “Main” only)
Lets you turn the output of 12V triggers on or
off based on the output setting of the HDMI
OUT B jack.
x MAIN (for “Zone2” and “Zone3”
only)
Lets you link operation of trigger in zone 2 or
zone 3 to the TRIGGER OUT MAIN jack.
Tip
Even when this receiver is standby mode (press ?/1
on the remote to turn off this receiver), the receiver
in zone 2 or zone 3 remains turned on. To turn off all
receivers, press ?/1 and AV ?/1 on the
multifunction remote at the same time (SYSTEM
STANDBY).
Audio settings
You can make settings for the audio to suit
your preference.
The D.L.L. function is Sony proprietary
technology that allows low quality digital
audio signals and analog audio signals to be
played back with high quality sound.
x OFF
x AUTO 1
This function is available for lossy
compression audio formats and analog audio
signals.
x AUTO 2
This function is available for Linear PCM
signals, as well as lossy compression audio
formats and analog audio signals.
Note
• This function works when “A.F.D. Auto” is
selected. However, this function does not work in
the following cases.
– Linear PCM signals with a sampling frequency
of other than 44.1 kHz are being received.
– Dolby Digital Plus, Dolby Digital EX, Dolby
TrueHD, DTS 96/24, DTS-ES Matrix 6.1, DTS-
HD Master Audio, or DTS-HD High Resolution
Audio signals are being received.
Lets you delay the output of audio to minimize
the time gap between audio output and visual
display.
Digital Legato Linear (D.L.L.)
A/V Sync (Synchronizes audio
and video output)
continued