Sony STR-DA5600ES - Manual (Page 123)

123 GB
Adju
stin
g Setti
ngs
• Theater
Theater type (default setting) mixes
reflection and reverberation sound
creating the characteristics of a mastering
studio. Additionally, this type mixes in
frequency characteristics that are often
found in professional studios and movie
theaters. It is ideal for watching movies in
a listening room that has less
reverberation.
• Studio
In Studio type, effects are kept to a
minimum, while still providing a great
theater experience. This type provides the
accuracy of the original recording.
3 Press RETURN/EXIT O.
To adjust the gain level of the
front height channels
You can adjust the gain level of the front height
channels for Pro Logic IIz mode.
1 Select “PLIIz Height,” then press b.
2 Adjust the gain level, then press B.
• Low
Decreases the gain level to ±0 dB.
• Mid
Increases the gain level to +3 dB (default
setting).
• High
Increases the gain level to +5 dB.
3 Press RETURN/EXIT O.
EQ settings
You can use following parameters to adjust the
tonal quality (bass/treble level) of front, center
and surround/surround back speakers.
Notes
• This function does not work in the following cases.
– The multi-channel input is selected.
– “2ch Analog Direct” is being used.
– Dolby TrueHD signals with a sampling
frequency of 176.4 kHz and higher are being
received.
• If the equalizer is adjusted while the receiver is
receiving signals with a sampling frequency of
176.4 kHz and higher, the signals will always be
played back at either 44.1 kHz or 48 kHz.
To adjust the equalizer on the
EQ screen
1 Select the speaker on the screen you
want to adjust, then press
.
2 Select “Bass” or “Treble.”
3 Adjust the gain, then press .
Level
(dB)
Bass Treble
Frequency
(Hz)