Sony STR-DA5600ES - Manual (Page 64)

64 GB
Listening to FM/AM radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas (aerials) to the receiver
(page 40).
Tip
The tuning scale for direct tuning is shown below.
• FM band
100 kHz (USA/Canadian model)
50 kHz (European model)
• AM band 10 kHz* (USA/Canadian model)
9 kHz (European model)
* The AM tuning scale can be changed (page 66).
1
Select “ FM” or “ AM”
from the menu, then press
or b.
The FM or AM menu list appears on the
TV screen.
2
Select “Auto Tuning,” then
press .
3
Press V/v.
Press V to scan from low to high, press v
to scan from high to low.
The receiver stops scanning whenever a
station is received.
In case of poor FM stereo
reception
1 Tune in the station you want to listen to
using Auto Tuning, Direct Tuning
(page 64), or select the preset station
you want (page 67).
2
Press OPTIONS.
The option menu appears.
3 Select “FM Mode,” then press .
4 Select “MONO,” then press .
Enter the frequency of a station directly by
using the numeric buttons on the multifunction
remote. This operation cannot be performed
using the simple remote.
Tuning
Tuning into a station
automatically (Auto Tuning)
OPTIONS
MENU
V/v/b,
Tuning into a station directly
(Direct Tuning)