Sony STR-DA3600ES - Manual (Page 101)

101 GB
Us
ing O
th
e
r
Fe
atures
Using the sleep timer
You can set the receiver to turn off
automatically at a specified time.
Press SLEEP repeatedly.
Each time you press SLEEP, the display
changes cyclically as follows:
When sleep timer is being used, “SLEEP”
lights up in the display window of the receiver.
Tip
To check the remaining time before the receiver
turns off, press SLEEP. The remaining time appears
on the display. If you press SLEEP again, the sleep
timer will be changed.
Enjoying the surround
effect at low volume
levels
(Night Mode)
This function allows you to retain a theater like
environment at low volume levels. This
function can be used with other sound fields.
When watching a movie late at night, you will
be able to hear the dialog clearly even at a low
volume level.
1
Select “ Settings” from the
menu, then press or b.
2
Select “Audio,” then press
or b.
3
Select “Night Mode,” then press
.
4
Select “ON,” then press .
Notes
• This function does not work when the multi-
channel input is selected.
• This function does not work when “2ch Analog
Direct” is being used.
• This function does not work when Dolby TrueHD,
or Linear PCM signals with a sampling frequency
of 176.4 kHz and higher are being received.
Tip
While this function is on, the Bass, Treble increase,
and “D. Range Comp” is automatically set to
“MAX.”
Recording using the
receiver
You can record from a video/audio component
using the receiver. Refer to the operating
instructions supplied with your recording
component.
SLEEP
V/v/b,
MENU
continued