Sony STR-DA3600ES - Manual (Page 124)

124 GB
System settings
Customizes the settings of the receiver.
Let you turn the control mode for maintenance
and service on or off.
x OFF
x ON
Lets you turn the function that switches the
main zone to standby mode automatically
when you do not operate the receiver or when
there is no signal input to the receiver on or off.
x ON
Switches to standby mode after approximately
30 minutes.
x OFF
Does not switch to standby mode.
Note
This function does not work when “Server,”
“Rhapsody,” “SHOUTcast,” “FM,” “AM,”
“SIRIUS,”or the multi-channel input is selected.
Lets you lock the settings of the receiver.
x ON
You can only turn this function on using the
setting menu. When you turn this function off,
perform the following procedure.
1
Press ?/1 to turn off the
receiver.
2
While holding down MUSIC and
SPEAKERS (A/B/A+B/OFF),
press ?/1 to turn on the
receiver.
You can check the version of the software on
the system of the receiver, and you can also
update the software of the receiver.
You can also update the software of the
receiver using the Setup Manager application
software provided on the CD-ROM supplied
with the receiver. For details, see “Updating
the receiver software using the Setup
Manager” (page 89).
To update the receiver using the
menu
1 Select “Software Version,” then press
.
The current software version is displayed
on the TV screen.
2 Select “Update via Internet,” then press
.
The current software version and latest
software version are displayed on the TV
screen.
3 Press to select “Update.”
A confirmation screen appears on the TV
screen.
4 Select “Start,” then press .
RS232C Control
Auto Standby
Settings Lock
Software Version
?/1
SPEAKERS (A/B/A+B/OFF)
MUSIC