Sony STR-DA3600ES - Manual (Page 136)

136 GB
2
Select “Quick Click,” then press
.
3
Select “Macro,” then press .
4
Select the macro number for
which you want to program the
sequence of operation(s), then
press .
5
Select the step number you
want to set, then press
.
6
Select the component type you
want, or “- Wait -,” then press
b.
If you select “- Wait -,” go to step 8.
7
Select the key, then press b.
8
Select the duration of time you
want, then press
.
9
Repeat steps 6 to 8 when you
want to program operations for
other components.
To input a macro name
1
Select “ Settings” from the menu,
then press or b.
2 Select “Quick Click,” then press .
3 Select “Macro,” then press .
4 Press OPTIONS.
The option menu appears.
5 Select “Name Input,” then press .
6 Press V/v to select a character, then
press b.
You can shift input position backward and
forward by pressing
B/b.
7 Repeat steps 6 to input a character one
by one.
The name you entered is registered.
To erase a programmed macro
1
Select “ Settings” from the menu,
then press or b.
2 Select “Quick Click,” then press .
3 Select “Macro,” then press .
4 Select the macro number you want,
then press
.
5 Select the step number you want, then
press .
6 Select “–” as a component name, then
press .
7 Repeat steps 5 and 6 to clear the
stored macro.
Setting remote control
codes that are not stored
in Quick Click
1
Select “ Settings” from the
menu, then press or b.
2
Select “Quick Click,” then press
.
3
Select “Source Component,” or
“Common Component,” then
press .
4
Select the component you
want, then press
.
V/v/B/b,
MENU