Addendum, Networka ir acpa4000 – American Power Conversion AIRACPA4000 User Manual
Page 18
®
®
®
®
ADDENDUM
NetworkA
IR ACPA4000
17
b. For Windows FTP clients, separate the port number from the IP
address by a space. For example, if the Network Management Card’s
FTP Server Port
setting has been changed from its default of
21
, such
as to
21000
, you would use the following command for a Windows
FTP client transferring a file to a Network Management Card with an
IP address of 150.250.6.10.
ftp>
open 150.250.6.10 21000
4. Log on using the Administrator user name and password. (
apc
is the
default for both.)
5. Upgrade the AOS. For example:
ftp>
bin
ftp>
put apc_hw02_aos_225.bin
6. When FTP confirms the transfer, type
quit
to close the session.
7. Wait 20 seconds, and then repeat
step 2
through
for the
application module. In
, use the application module file instead of
the AOS module.