American Power Conversion AIRACPA4000 - Manual (Page 2)

® ® ® ®
ADDENDUM
NetworkA
IR ACPA4000
1
Network Management Card Wizard
Introduction
Overview
The APC Network Management Card Wizard is a Microsoft
®
Windows
®
application that pre-configures and reconfigures single or multiple
Management Cards of APC devices.
.
The Wizard works locally through the serial port of your computer or
remotely over your TCP/IP network. Using the Wizard to configure the
Network Management Cards of your NetworkAIR PA Portable Air
Conditioners, you can do the following:
• Automatically discover unconfigured Network Management Cards
remotely or locally
• Initially configure multiple Network Management Cards
• Reconfigure multiple Network Management Cards after they are
deployed
You cannot use the Wizard to upgrade the firmware for a
Management Card. Instead, use FTP, SCP, or XMODEM.
See
Upgrading Firmware.
Not all features in the user interface of the Network
Management Card Wizard are supported for NetworkAIR PA
Portable Air Conditioners. Use only the features documented
in this addendum.