American Power Conversion AIRACPA4000 - Manual (Page 25)

® ® ® ®
ADDENDUM
NetworkA
IR ACPA4000
24
To update the configuration settings for one or more NetworkAIR PA
Portable Air Conditioners using the Wizard:
1. Install (if necessary) and run the Wizard (included on the NetworkAIR
PA Portable Air Conditioner).
2. If you have a saved .ini file, load it and change any settings as needed.
You can also create and save new settings.
3. Click Finish .
4. Select the settings you want to transmit to the Management Card, and
then click Next > .
5. You can view, print, and save your new settings. When finished, click
Next > .
6. Choose the Network (via FTP) option, and then click Next > .
7. If you have saved a list of Management Card IP addresses, load that
list now. If you do not have a saved list, enter the IP addresses of the
Management Cards that you want to receive the configuration settings.
Enter the
FTP Server Port and Administrator user name and
password of the Management Cards to which you are transmitting the
settings.
8. Save the new IP address list, and then click Next > .
9. Click Apply to transmit the configuration settings to all of the specified
Management Cards. You can save, print, or clear the window
containing the download results.
See Installing the Wizard .
To verify the update, see Verifying Upgrades and Updates .