American Power Conversion AIRACPA4000 - Manual (Page 5)

® ® ® ®
ADDENDUM
NetworkA
IR ACPA4000
4
Reconfiguring multiple Network Management Cards
To reconfigure multiple Network Management Cards:
1. Deploy your NetworkAIR PA Portable Air Conditioners without any pre-
configuration.
2. Configure the TCP/IP settings of each NetworkAIR PA Air Conditioner
remotely through auto-discovery of its Management Card.
3. Reconfigure other settings of the Management Cards of NetworkAIR
PA Air Conditioners remotely.
See Configuring the required TCP/IP settings .
See also
The Network Management Cards can also use a DHCP
server to assign the TCP/IP settings. See the Boot Mode
description in the NetworkAIR ACPA4000 User’s Guide
(
990-1702-EN.pdf ) on the Utility CD.
See Reconfiguring deployed Network Management
Cards . To perform this procedure, the FTP server
must be enabled.