American Power Conversion AIRACPA4000 - Manual (Page 38)

® ® ® ®
ADDENDUM
NetworkA
IR ACPA4000
37
7. The last screen verifies that the certificate has been created and
instructs you on the next task, to load the server certificate to the
Network Management Card. It displays the location and name of the
server certificate, which has a
.p15 file extension and contains the
Network Management Card’s private key and the public key obtained
from the
.cer or .crt file.
Load the server certificate to the Network Management Card.
Perform these steps:
1. On the Network menu of the Web interface of the Network
Management Card, select the Web/SSL option.
2. In the SSL/TLS Server Certificate section of the page, browse to the
server certificate, the .p15 file you created in the procedure Import the
signed certificate . (The default location is C:\Program Files\American
Power Conversion\APC Security Wizard .)
Alternatively, you can use FTP or Secure CoPy (SCP) to
transfer the server certificate to the Network Management
Card. If you use FTP or SCP for the transfer, you must
specify the correct location,
\sec , on the Network
Management Card. For SCP, the command to transfer a
certificate named
cert.p15 to a Network Management Card
with an IP address of 156.205.6.185 would be:
scp cert.p15 [email protected]:\sec\cert.p15