Sony SAT-T60 - Manual (Page 100)

68

 

!<3 & The number your Receiver is currently using to call the TiVo
Service is displayed on the
 

!
$:
 screen. To change it:
1. Select “Set Dial-In Number” on the  

!
$:
 screen. The 5

*screen displays.
2. Use the number keypad on the remote to set the area code, then press SELECT. If
you changed the area code, or if the Receiver has not made a daily call in the last
twenty-four hours, the
; *
3 & screen appears and the Receiver calls the
TiVo Service. After the phone call, press SELECT. The 

!<3 & screen
appears.
3. Use the UP/DOWN arrow to choose one of the numbers on the 

!<3 &
screen. The Receiver will use this number to access the TiVo Service. After you
press SELECT, the


!
$)&
screen will appear.
• If your area code has no access numbers, you can press the LEFT arrow to
return to the 5
* screen and try to enter a nearby area code.
• If none of the numbers listed on the 

!<3 & screen are in your local
calling area, select “None of the above.” The 3%
!3 & screen will
appear.
4. The 3%
!3 & screen appears if you selected “None of the above” on the
Dial-In Numbers screen. Select “Request 800 number authorization” on the 3
%
!3 & screen. This temporarily authorizes you to use the toll-free number
and submits a request to TiVo Customer Care. TiVo’s policy is to allow you to use
the toll-free number if there are no local numbers available. TiVo will research
available dial-in numbers at your location and send a message to your Receiver
authorizing you to use the toll-free number, or suggesting a local alternative.
5. The 

!
$)&
screen appears after you have chosen a dial-in number.You
should use this screen to tell the Receiver which dialing format to use. For
        4      
   
  +*  
  +* 

 
%'*
SONY COMBO 2 VG.book Page 89 Friday, December 1, 2000 12:05 PM