Sony DCR-TRV250 - Manual (Page 111)

111
Editing
Step 2: Setting the VCR for operation with the i.LINK cable
When you connect using the i.LINK cable (optional), follow the procedure below.
(1) Set the POWER switch to VCR on your camcorder.
(2) Turn the power of the connected VCR on, then set the input selector to DV
input. When you connect a digital video camera recorder, set its power switch
to VCR/VTR.
(3) Press MENU to display the menu settings.
(4) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(5)
Turn the SEL/PUSH EXEC dial to select TAPE in VIDEO EDIT, then press the
dial.
Turn the SEL/PUSH EXEC dial to select VIDEO EDIT, then press the dial.
(6) Turn the SEL/PUSH EXEC dial to select EDIT SET, then press the dial.
(7) Turn the SEL/PUSH EXEC dial to select CONTROL, then press the dial.
(8) Turn the SEL/PUSH EXEC dial to select i.LINK, then press the dial.
Dubbing only desired scenes – Digital program editing (on tapes)