Sony DCR-TRV250 - Manual (Page 125)

125
Editing
Notes
•The zero set memory function does not work with tapes recorded in the Hi8
/
standard 8 mm system.
•Pictures and sound recorded on the section between the insert start and end points
will be erased when you insert the new scene.
•If you use the Remote Commander when dubbing a tape, the VCR may operate
accidentally. Should this happen, change the commander mode of the VCR to one
other than VTR2, or cover the sensor of the VCR with black paper.
If you insert scenes on the tape recorded on another camcorder
The pictures and sound may be distorted. We recommend that you insert scenes on a
tape recorded on your camcorder.
When the inserted picture is played back
Pictures and sound may be distorted at the end of the inserted section. This is not a
malfunction.
Pictures and sound at the start point and the end point may be distorted in the LP
mode.
To insert a scene without setting the insert end point
Skip step (3) and (4). Press x when you want to stop inserting.
Inserting a scene from a VCR – Insert Editing