Sony DCR-TRV250 User Manual
Page 194
194
If you cannot install the USB driver
The USB driver has been registered incorrectly as your computer was connected to your
camcorder before installation of the USB driver was completed. Perform the following
procedure to correctly install the USB driver.
Viewing images recorded on a tape or live from your
camcorder
Step 1: Uninstall the incorrect USB driver
1
Turn on your computer and allow Windows to load.
2
Connect the AC Adaptor, and set the POWER switch to VCR.
3
Connect the (USB) jack on your camcorder to the USB connector on your
computer using the supplied USB cable.
4
Open your computer’s “Device Manager.”
Windows XP:
Select “Start”
t “Control Panel” t “System” t “Hardware” tab and click
the “Device Manager” button.
If there is no “System” inside “Pick a category” after clicking “Control Panel,”
click “Switch to classic view” instead.
Windows 2000:
Select “My Computer”
t “Control Panel” t “System” t “Hardware” tab
and click the “Device Manager” button.
Windows 98SE/Windows Me:
Select “My Computer”
t “Control Panel” t “System,” and click “Device
Manager.”
Connecting your camcorder to your computer using the USB cable