Sony DCR-TRV250 - Manual (Page 143)

143
“Memory Stick” Operations – Recording
Superimposing a still image in the “Memory Stick” on an image
– MEMORY MIX
Recording superimposed images on a “Memory Stick” as a still
image
Before operation
Insert a “Memory Stick” containing still images into your camcorder.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the left (unlock) position.
(2) Press MEMORY MIX.
The first recorded image appears in the bottom-right corner of the screen as a
thumbnail image. The last image that is used in MEMORY MIX will be
displayed next time.
(3) Press MEMORY+/– to select the still image you want to superimpose.
– : To see the previous image
+ : To see the next image
(4) Turn the SEL/PUSH EXEC dial to select the desired mode.
The mode changes as follows:
M. CHROM
y M. LUMI y C. CHROM
(5) Press the SEL/PUSH EXEC dial.
The still image overlaps with the picture on the screen.
(6) Turn the SEL/PUSH EXEC dial to adjust the effect.
M. CHROM – The degree of the blue areas in the still image which is to be
swapped with a moving picture
M. LUMI – The brightness of the area in the still image which is to be
swapped with a moving picture
C. CHROM – The degree of the blue areas in the moving picture which is
to be swapped with a still image
The fewer bars there are on the screen, the stronger the effect becomes.
(7) Press PHOTO deeply to start recording.
The image displayed on the screen will be recorded on a “Memory Stick.”
Recording is complete when the bar scroll indicator disappears.