Sony DCR-TRV250 - Manual (Page 117)

117
Editing
Dubbing only desired scenes – Digital program editing (on tapes)
Erasing the program you have set
Erase OUT first and then IN of the last program.
(1) Turn the SEL/PUSH EXEC dial to select UNDO, then press the dial.
(2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.
The last set program mark flashes, then the setting is canceled.
To cancel erasing
Select RETURN in step (2).
Erasing all programs
(1)
Turn the SEL/PUSH EXEC dial to select TAPE in VIDEO EDIT, then press the
dial.
Turn the SEL/PUSH EXEC dial to select VIDEO EDIT, then press the dial.
(2) Select ERASE ALL in the menu settings. Turn the SEL/PUSH EXEC dial to
select EXECUTE, then press the dial.
All the program marks flash, then the settings are canceled.
To cancel erasing all programs
Select RETURN in step (2).
To cancel the program you have set
Press MENU.
The program is stored in memory until the tape is ejected.
Notes
•Digital program editing does not work with tapes recorded in the Hi8
/
standard 8 mm system.
•You cannot dub the title or display indicators. However, you can dub the title which
has already been recorded on a tape.
•You cannot operate recording during Digital program editing on a tape.
You cannot set IN or OUT to the following portions of the tape:
– A portion recorded in Hi8
/standard 8 mm system
– A blank portion of the tape
The total time may not be displayed correctly in the following cases:
– The tape is recorded in the Hi8
/standard 8 mm system.
– There is a blank portion between IN and OUT on the tape.