Sony DCR-TRV250 User Manual
Page 172
172
You can enlarge still images recorded on a “Memory Stick.” You can select and view a
desired part from the enlarged still image. Also, you can copy the desired part of the
enlarged still image to a tape.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY or VCR. Make sure that the LOCK switch
is set to the left (unlock) position.
(2) Press PB ZOOM on your camcorder while you are playing back images
recorded on the “Memory Stick.” The center of the image is enlarged to about
twice its size, and
appear on the screen.
(3) Turn the SEL/PUSH EXEC dial to move the enlarged image, then press the
dial.
: To view the upper part of the image
: To view the lower part of the image
(4) Turn the SEL/PUSH EXEC dial to move the enlarged image, then press the
dial.
: To view the left part of the image (Turn the dial downward.)
: To view the right part of the image (Turn the dial upward.)
(5) Adjust the zoom ratio by the power zoom lever.
You can enlarge the image from 1.1 times up to five times its size.
W : To decrease the zoom ratio
T : To increase the zoom ratio
Enlarging still images recorded on a
“Memory Stick” – Memory PB ZOOM
5
2
PB ZOOM
3
4
PB ZOOM
×
2.0
[EXEC] :
T
t
PB ZOOM
×
2.0
[EXEC] :
r
R