Changing the menu settings – Sony DCR-TRV250 User Manual
Page 223
223
Customizing Your Camcorder
Changing the menu settings
Note *
4)
If you press DISPLAY with DISPLAY set to V-OUT/LCD in the menu settings, the
picture from a TV or VCR will not appear on the screen even when your camcorder is
connected to outputs on the TV or VCR. (Except when your camcorder is connected
with the i.LINK cable)
After five minutes of removing the power source *
3)
The COMMANDER item returns to their default settings.
When recording a close subject
When REC LAMP is set to ON, the red camera recording lamp on the front of the
camcorder may reflect on the subject if it is close. In this case, we recommend that you
set REC LAMP to OFF.
*
1)
Modes on the POWER switch vary depending on models (p. 16).
*
2)
*
3)
*
4)
*
5)
Icon/item
OTHERS
VIDEO EDIT
*
4)
*
5)
Mode
z
RETURN
TAPE
MEMORY
—
Meaning
To cancel video editing.
To make a program and perform video editing
(p. 106).
To make a program and perform MPEG editing
(p. 156).
To make a program and perform video editing
(p. 106).
POWER
switch *
1)
VCR
VCR