Sony DCR-TRV250 - Manual (Page 208)

208
You can capture images and sound from an analog video unit on your computer which
has the i.LINK connector by transmitting data via your camcorder.
Before operation
Set DISPLAY to LCD in the menu settings. (The default setting is LCD.)
(1) Set the POWER switch to VCR.
(2) Press MENU to display the menu settings.
(3) Turn the SEL/PUSH EXEC dial to set A/V t DV OUT in
to ON (p. 214).
(4) Start playback on the analog video unit.
(5) Start procedures for capturing images and sound on your computer.
The operation procedures depend on your computer and the software you are
using.
For details on how to capture images, refer to the operating instructions of
your computer and the software you are using.
After capturing images and sound
Stop capturing procedures on your computer, and stop playback on the analog video
unit.
Capturing images from an analog video unit
on your computer – Signal convert function
i.LINK
VIDEO
AUDIO
S VIDEO
OUT
AUDIO/VIDEO S VIDEO
DV
VCR
i.LINK cable
(optional)
: Signal flow
A/V connecting
cable (supplied)
White
Red
Yellow
is marked on
this side.