Sony DCR-SR220 - Manual (Page 13)

Getting Started
13
Step 2: Charging the battery pack
You can charge the “InfoLITHIUM”
battery pack (H series) (p. 94) after
attaching it to your camcorder.
Notes

Your camcorder operates only with an
“InfoLITHIUM” battery pack (H series).
1
Connect the AC Adaptor to the DC
IN jack on the Handycam Station.
Be sure that the  mark on the DC plug
is facing up.
2
Connect the power cord (mains
lead) to the AC Adaptor and the wall
outlet (wall socket).
3
Turn the POWER switch in the
direction of the arrow to OFF (CHG)
(the default setting).

4
Attach the battery pack by sliding it
in the direction of the arrow until it
clicks.
5
Set the camcorder onto the
Handycam Station securely.
The /CHG (charge) lamp lights up and
charging starts.
The /CHG (charge) lamp turns off
when the battery pack is fully charged.

When setting the camcorder onto the
Handycam Station, close the DC IN jack
cover.
Notes

Disconnect the AC Adaptor from the DC IN
jack holding both the Handycam Station and
the DC plug.

Battery pack
DC IN jack
DC plug
AC Adaptor
Power cord (Mains lead)
To the wall outlet
(wall socket)
/CHG (charge)
lamp
POWER switch