Sony DCR-SR220 - Manual (Page 79)

Troubleshooting
79

The following menu items return to the
default settings when you set the POWER
switch to OFF (CHG) for more than 12
hours.

[FOCUS]

[SPOT FOCUS]

[EXPOSURE]

[SPOT METER]

[SCENE SELECTION]

[WHITE BAL.]

[MICREF LEVEL]

[BLT-IN ZOOM MIC]

[DROP SENSOR]

[COLOR SLOW SHTR]

[SUPER NIGHTSHOT]
Even if you press EASY, menu settings
do not switch to their defaults
automatically.

During Easy Handycam operation,
settings for the following menu items
are maintained the ones before Easy
Handycam operation.

[FILE NO.]

[VOLUME]

[TV TYPE]

[ DISPLAY]

[BEEP]

[ INDEX SET]

[CLOCK SET]

[AREA SET]

[DST SET]/[SUMMERTIME]

[WIDE SELECT]

[ IMAGE SIZE]

[DEMO MODE]

[TIMING]

[ LANGUAGE SET]

[RECORD SOUND]

[MOVIE MEDIA SET]

[PHOTO MEDIA SET]

[FLASH MODE]

[AUDIO MODE]

[CONVERSION LENS]
Your camcorder gets warm.

This is because the power has been
turned on for a long time. This is not a
malfunction.
The supplied Remote Commander does
not function.

Set [REMOTE CTRL] to [ON] (p. 69).

Insert a battery into the battery holder with
the +/– polarities correctly matching the
+/– marks (p. 103).

Remove any obstructions between the
Remote Commander and the remote
sensor.

Point the remote sensor away from strong
light sources such as direct sunlight or
overhead lighting. Otherwise, the Remote
Commander may not function properly.
Another DVD device malfunctions
when you use the supplied Remote
Commander.

Select a commander mode other than DVD
2 for your DVD device, or cover the sensor
of your DVD device with black paper.
Batteries/Power sources
The power abruptly turns off.

When approximately 5 minutes have
elapsed while you do not operate your
camcorder, the camcorder is automatically
turned off (A.SHUT OFF). Change the
setting of [A.SHUT OFF] (p. 69), or turn
on the power again, or use the AC Adaptor.

The power turns off automatically if the
time you set in [QUICK ON STBY] passes
during sleep mode. In this case, turn on the
power again.

Charge the battery pack (p. 13).
The /CHG (charge) lamp does not
light while the battery pack is being
charged.

Turn the POWER switch to OFF (CHG)
(p. 13).