Charging time, Recording time, Playback time – Sony DCR-SR220 User Manual

Page 15

Advertising
background image

Getting Started

15

After a while, the approximate recordable

time and battery information appear for

about 7 seconds. You can view the battery

information for up to 20 seconds by

pressing DISP/BATT INFO again while the

information is displayed.

Charging time

Approximate time (min.) required when

you fully charge a fully discharged battery

pack.

Battery pack

Charging time

NP-FH50

135

NP-FH60

(supplied)

135

NP-FH70

170

NP-FH100

390

Recording time

Approximate time (min.) available when

you use a fully charged battery pack.

Battery pack

Continuous
recording time

Typical recording
time

*

NP-FH50

85

90

40

40

NP-FH60

(supplied)

115

120

50

60

NP-FH70

190

195

90

90

NP-FH100

430

440

210

220

Top: When the media is set to the hard disk

Bottom: When the media is set to the “Memory

Stick PRO Duo”

* Typical recording time shows the time when

you repeat recording start/stop, turning the

power on/off and zooming.

Notes

All times measured under the following

settings:

Recording mode: [SP]

The LCD backlight turns on

Playback time

Approximate time (min.) available when

you use a fully charged battery pack.

Battery pack

Playback time

*

NP-FH50

120

125

NP-FH60

(supplied)

160

165

NP-FH70

255

270

NP-FH100

580

600

Top: When the media is set to the hard disk

Bottom: When the media is set to the “Memory

Stick PRO Duo”

* When the LCD backlight is on.

On the battery pack

Before changing the battery pack, turn the

POWER switch to OFF (CHG) and turn off the

(Movie) lamp/ (Still) lamp (p. 17)/

ACCESS lamp (p. 25).

The /CHG (charge) lamp flashes during

charging, or Battery Info (p. 14) will not

be correctly displayed under the following

conditions:

The battery pack is not attached correctly.

The battery pack is damaged.

The battery pack is worn-out (for Battery Info

only).

The power will not be supplied from the

battery as long as the AC Adaptor is connected

to the DC IN jack of your camcorder or the

Handycam Station, even when the power cord

(mains lead) is disconnected from the wall

outlet (wall socket).

When attaching an optional video light, it is

recommended that you use an NP-FH70/FH100

battery pack.

Remaining battery (approx.)

Recording capacity (approx.)

Advertising
This manual is related to the following products: